Milescraft Pocket Hole Jig200

The Milescraft PocketJig200 pocket hole jig allows you to connect your work pieces in a quick and timely manner. Whether you want to build storage projects, cabinets, shelves, or bookcases, this kit does it all. Allowing you to create corner joints, T-Joints, Framing Joints, Miter Joints, and do repairs. With built-in settings for board thicknesses, there is no need to manually measure. Just set this pocket jig to your desired setting, set the depth of your bit, and start drilling.

PocketJig200 Pocket Hole Jig Kit – Designed To Make Repairs Simple

• Spring-loaded sled adjust button allows the jig to be set to do repairs of any nature around your home or your shop

Built-In Imperial And Metric Scales

• The built-in scales allow you to easily measure the thickness of your work piece

Board Thickness Settings

• There are four common board thickness settings built into the pocket jig: 1/2”, 3/4”, 1” and 1-1/2” (12, 19, 27, 38mm)
• Easy readout arrow to help define your board thickness setting
• Easily adjust to your board thickness setting with the single sled design and sled adjust button

Hardened Steel Drill Bushings

• For precise and accurate pocket holes every time using the Milescraft PocketBit
• Tight tolerances between the bushing and the drill bit, reduce tear-out and create a clean pocket hole on the first try

Recessed Clamp Pocket with Magnet

• Helps to keep the clamp in the same position as you move to different locations
• With the stronger rare earth magnet, you can easily clamp the jig from one location to another
• For speed and accuracy, use the Milescraft FaceClamps

Convenient Built-In Depth Setting

• Easily set your bit for the correct drilling depth

3/8″ HSS Step Drill Bit

• Made from high-speed steel the Pocket Bit with a 1/4″ hex shaft is designed to reduce clogging and provide smooth and precise holes

3/8″ Split Design Stop Collar with Flat

• The split design prevents slipping of the set screw when tightened and the flat prevents the bit from rolling
• Includes hex key for tightening

Quick Change Compatible Connector

• With the Milescraft Connector, you can quickly change from drilling to driving
• Accepts all 1/4″ hex bits
• Quickly and easily change from drilling to driving

3” and 6” Magnetic T20 Torx® Drivers

• For maximum torque settings without stripping
• To allow pocket screws to align with maximum precision

Rugged Storage Case

• With designated places for components, you will never have to go digging through your toolbox for your pocket hole jig again
• Storage compartment for 2″ Face Clamp
• Storage slot for PocketJig100