STARRETT OOPS ABRBOUR Hole enlarging arbor for holesaws A19
The Starrett Oops® Arbor is a must when you need to enlarge a hole size.
The arbor simply replaces the centre pilot drill bit with a hole aw that fits the existing hole size, and then a you simply fit the larger diameter hole aw to the outside, thus turning the smaller hole aw into your guide or pilot
Ideal for a range of uses the arbors are excellent when you are fitting new locks to existing household doors, as manytimes the new door lock might be a larger diameter than the existing hole.
- Dsigned to suit all standard BI Metal holesaws
- Hole enlargement arbor "OOPS ARBOR" Replacing the pilot drill with the A19 allows diameters to be enlarged by attaching a saw of the same size to that of the existing hole. This saw then acts as the pilot for the larger diameter saw that is attached to the arbor.
COPY RIGHT TOOL KING ALL RIGHTS RESERVED
1 Review
-
Oops arbor review
Works perfectly and solves the problem if you make a hole to small and need to enlarge it, a lot cheaper alternative to buying a reload set of holesaws because you can use your existing holesaws
